PA66 GF15为尼龙66和15%玻璃填充，这些材料具有中等刚度和强度，但其机械性能比未填充颗粒要好得多。安美塑料厂采用15%的玻璃纤维和改性尼龙66加固，结合其他性能增强，如高抗拉强度、热稳定性和阻燃性，使其适合注塑成型；
其他百分比玻璃填充尼龙也可定制。
尼龙66 GF15，主要用于发动机周围的内部和外部结构件、电气开关和电子连接器。
物理性能
Ash | (15.0% 1 ISO3451/1) |
Conditioned | 600°C*2h |
Density | (1245Kg/m3 1 ISO1183) |
Conditioned | 23°C |
Shrinkage Parallel Flow | (0.7-1.0% 1 ISO294-4) |
Shrinkage Vertical Flow | (1.0-1.4% I ISO294-4) |
机械性能
Tensile strength (125.0MPa 1 ISO527) Conditioned | 5mm/ min |
Tensile Strain at Break (2.0% I ISO527) Conditioned | 5mm/min |
Notched Impact Strength 6.0KJ/m2 ISO179) Conditioned | 1.0J |
Flexural Strength (188MPa 1ISO178) Conditioned | 2mm/min |
Flexural Modulus (5350MPa I ISO178) Conditioned | 2mm/ min |
热性能
Melting Point | (260°C I ISO11357) |
Hot Deformation Temperature | (240*C I ISO75) |
Conditioned | 1.8MPa |
Flammability Class | (HB 1UL94) |
Conditioned | mm |
注射成型条件
Drying Temperature | 130°C |
Drying Time | 3h |
Cylinder Temperature | 280-300°C |
Nozzle Temperature | 280-300*C |
Tooling Temperature | 80-100*C |
*成型条件为；只是；仅供参考，请根据实际情况进行调整
English 
中文 
